Fast Model Resin is Formlabs’ fastest resin, capable of printing at speeds of over 100 mm per hour. Print dental models in minutes or large prototypes in less than two hours.
Fast Model Resin is the next generation of Draft Resin that leverages the Form 4 Series to print three times faster, while offering improved mechanical properties.
POST-CURING OPTIONAL
Ultimate Tensile Strength 62.0 MPa
Tensile Modulus 2.67 GPa
Elongation at Break 11%
Download the technical brochure here
Wash Settings
5 minutes
Start with a 5-minute wash and modify the wash time based on your part geometry and solvent purity.
Form Cure Settings
5 minutes at room temperature
15 minutes at 60 °C
Post-curing is optional for parts printed in Fast Model Resin. However, we recommend either a 5-minute room temperature cure to reduce surface tack and improve mechanical properties, or a 15-minute cure at 60 °C for the highest strength, stiffness, and heat deflection temperature.
Compatible with:
Form 4, Form 4B, Form 4L, Form 4BL
Compatible with these resin tanks: Form 4 Resin Tank, Form 4L Resin Tank
Compatible with these build platforms: Form 4 Build Platform, Form 4 Build Platform Flex, Form 4L Build Platform L